Retroradio GenresGuidesWhat reaches you, and who licensed it

Guide · FM reception

How FM Coverage Works – and How We Estimate It

By Justen Linker · Published · All guides

An FM station does not cover a neat circle on a map. How far it reaches comes down to how high the antenna is, how much power it radiates, the ground in between, and the radio in your hand.

FM travels by line of sight

FM broadcasting sits between 88 and 108 MHz, in the VHF band. Signals at these frequencies behave much like light: they travel in fairly straight lines, they do not bend far around the curve of the Earth, and they are not reflected back down by the upper atmosphere the way AM signals are at night. A station is heard well while the receiver can more or less "see" the antenna, and fades quickly once the horizon gets in the way.

That makes antenna height the single biggest factor. A useful rule of thumb for the radio horizon is about 4.1 × √(height in metres) kilometres. An antenna 100 m above the surrounding land has a horizon of about 41 km (25 mi); at 300 m it is roughly 71 km (44 mi). Raise the receiving antenna too — a rooftop or attic antenna instead of a car whip — and you add its own horizon on top.

Power helps, but less than you think

Stations are licensed by effective radiated power (ERP), the transmitter's output multiplied by the gain of its antenna. More power pushes a usable signal a little further toward the horizon and makes it stronger inside buildings, but it cannot push it far past the horizon. Doubling power adds far less range than doubling antenna height. Our guide to HAAT and ERP covers the numbers on a station page in detail.

Classes set the expected reach

The FCC sorts full-power FM stations into classes, each with a maximum power and antenna height. The class tells you roughly how big a station's protected service area is meant to be:

Class B stations sit in the crowded Northeast, coastal California and the Great Lakes, where the FCC packs stations closer together; Class C stations get room to spread out across the West and the Plains.

What the map cannot know

Real coverage is lumpy. Hills and ridges cast radio "shadows"; a valley town ten miles from a transmitter can get a worse signal than a hilltop farm forty miles away. Downtown buildings reflect the signal and cause multipath — the fluttering and hiss you hear at a stoplight. A neighbouring station on the same or an adjacent frequency can drown out a distant one well inside its nominal range. And receivers differ enormously: a good home tuner with an outdoor antenna will pull in stations a cheap clock radio never hears.

How Retroradio estimates reach

Every station page starts from the FCC's own record of the transmitter: its coordinates, class, power and antenna height. We take the nominal service radius for the station's class and list the communities whose Census centre falls inside it, nearest first, with the distance to each. That is why a town page shows the stations that reach it, not only the ones licensed to it — Clinton, Iowa lists Davenport signals, because that is what people in Clinton actually hear.

It is an estimate, and every page says so. Treat the nearest towns as reliable and the outermost as fringe: on a good radio with a decent antenna you will often do better than the estimate; in a car among hills you may do worse.

Getting a better FM signal

More guides

Spotted a mistake? Corrections are welcome at operator@the-retroradio.com.