Guide · AM reception
Why AM Radio Travels Hundreds of Miles at Night
By Justen Linker · Published · All guides
Turn on an AM radio after sunset and the dial fills with stations from cities hundreds of miles away. Nothing about the stations changed — the sky did.
Groundwave: AM by day
AM broadcasting uses the medium-wave band, 530 to 1700 kHz — wavelengths of roughly 175 to 560 metres, long enough that the signal follows the curve of the Earth as a groundwave. How far it gets depends heavily on the ground itself. Moist, fertile soil like Midwestern farmland conducts well and carries a signal a long way; sandy desert and rocky mountains soak it up; seawater carries it best of all. A 5,000-watt station on the prairie can cover far more territory than the same station in the Rockies.
Skywave: AM after dark
High above the ground, the ionosphere is made of layers of air ionised by sunlight. During the day the lowest of them, the D layer, absorbs medium-wave signals that head upward. At sunset it fades away within an hour or so, and those signals carry on up to the higher E and F layers, which bend them back down to Earth hundreds of miles from the transmitter. That reflected signal is the skywave, and it is why a radio in Iowa can pick up Cincinnati, Nashville or Pittsburgh on a winter night.
Skywave is not steady. It swells and fades as the ionosphere shifts, it is strongest in the middle of a long winter night, and it brings interference too: dozens of stations on the same frequency can arrive at once.
Why some stations cut power at sunset
Because every AM station's signal travels further at night, the FCC has to keep them from drowning each other out. That is what the AM classes are for. Of the 4,280 AM stations in our listings:
- 72 are Class A — the "clear-channel" stations, up to 50,000 watts, whose night-time skywave is protected across much of the country. Classic examples include WLW 700 Cincinnati, WGN 720 Chicago, WSM 650 Nashville, KFI 640 Los Angeles, KMOX 1120 St. Louis and WHO 1040 Des Moines.
- 1,531 are Class B — regional stations that usually stay on at night but often switch to a directional antenna pattern, throwing their signal away from other stations on the same channel.
- 907 are Class C — local stations on the six "graveyard" channels (1230, 1240, 1340, 1400, 1450 and 1490 kHz), each shared by well over a hundred stations, typically at 1,000 watts.
- 1,770 are Class D — stations licensed mainly for daytime. Many must drop to a few watts after sunset; KAYL in Storm Lake, Iowa, for instance, runs 250 watts by day and 6 watts at night.
Station pages on this site list day and night power separately wherever the FCC record gives both, so you can see at a glance which stations will vanish from your area at dusk.
Hearing distant AM stations
- Listen after dark, and best in winter. Long nights and less static from thunderstorms make November to February the prime season.
- Turn the radio, not just the dial. Most AM radios have a ferrite-bar antenna inside, which is directional: rotating the set can bring a station up or null out an interfering one.
- Get away from electrical noise. LED bulbs, dimmers, phone chargers, solar inverters and televisions all buzz across the AM band. A battery radio by a window, or outside, often hears far more.
- Try the hour around sunrise and sunset. As the ionosphere changes, distant stations east or west of you can appear briefly before local stations change power.
- Wait for the top of the hour. Stations must give their call sign and city at the top of every hour, which is the surest way to identify what you are hearing. See our guide to long-distance listening.
More guides
- How FM coverage works
- FM translators explained
- Low-power FM explained
- Picking up distant stations
- Call signs explained
- HAAT and ERP explained
Spotted a mistake? Corrections are welcome at operator@the-retroradio.com.